Search results

  1. M

    best christmas present ever!!

    awesome, been 20 years but i remember my sons first days
  2. M

    whats the difference dually vs srw bed

    The area around the lip of the fender is also cut out a bit.
  3. M

    Seat re-upolstered?

    Try ebay, most people remove cloth for leather. Might get a great deal.
  4. M

    Need help diagnosing engine noise

    does the growl occur when the truck is not moving(in park).
  5. M

    7.3 turbo internals

    thx wish i could see a flow diagram. what in there goes bad? The wheels get beat up? there's 2 bearings in it, right? They can go bad? what else?
  6. M

    7.3 turbo internals

    Can someone walk me thru whats on the inside of the turbo? Does not have to be in great detail. KInd of curious as to what can fail? How many bearings are in it? where? When one fails what goes bad? thx
  7. M

    Question need help 7.3 wont start in the morning

    if you want to save some money the napa relay gpr109 is the same internals but the posts are slightly different positions. It works andd costs 17 bucks compared to the higher priced correct one(i thik) gpr110 napa number. Advance auto can cross it over. I know stancotr makes a much better one...
  8. M

    a new noise ??

    throw out bearing? Noise when spinning? gos away when lots or pressure is on it(clutch pressed in)
  9. M

    idm and ecm locations?

    The computer is the ecm right? Thats under the drivers kick panel? the idm? wheres that? thx
  10. M

    vacuume pumps

    muchos gracias
  11. M

    vacuume pumps

    Every morning when I turn the key on in my truck the vacuume pump starts to run? No big deal, but was wondering if that means I have a vacuume leak or is this normal? It will do it if I let it sit a few hours.
  12. M

    hpop reservoir draining out

    bump, anyone????
  13. M

    hpop reservoir draining out

    How can the hpop(reservoir) tank drain back to the pan? Bob guzzle mentioned the valve under the hpop or a really worn lpop? I have 117k on it. It runs well, just slightly slow starting. I checked the sight plug. It was close to empty this morning. Looking for how and where I need to look and if...
  14. M

    HPO x-over hose

    not sure but riffraffdiesel has em cheap. I used the hardline. Iliked it. Did not remove anything just put it in.
  15. M

    glow plugs and relay

    The relay just needs to click right? is it like a starter selonoid? Can i use a test light to see if power gets to the other side? if I take the time to pull the glow pugs, i will just replace them.
  16. M

    glow plugs and relay

    jumping it will tell me if the relay is bad? right? to test a glow plug I need to remove it? is this correct? running them for 2 minutes for smoke? Would this also help it run better the first 2 minutes? In a minute or so it runs better. thanks JL
  17. M

    glow plugs and relay

    How would I know if all the glow plugs are working properly? Relay too? Once the engine fires they glow plugs are all done working right? They dont effect it and how it runs when the engine is cold, right? Just effect the the initial starting? thx
  18. M

    Front brake rotor removal

    i dont think so. Mine, the rotor just goes on. I have a 99 dually. The rotor slides on then the dually spacer bolts on to it. In your case, I think the rotor should just come off. Could it judt be frozen on there? Try a pieceof wood and a hammer? I am sure someone will chime in but it should...
  19. M

    08 rear end fit a 99 thru 04?

    thanks, I think so too. Just not positive
  20. M

    08 rear end fit a 99 thru 04?

    bump.......
  21. M

    BamaSixGun

    thanks for the floor matts, they work great in my wifes truck. phil
  22. M

    biggest 7.3 lemon ever

    The ipr, is that mainly for starting pressures? the 500 psi? Does it effect the truck when its running too? If its stuck open? It would hard start right? Also lose high pressure to the oil pump causing the weak firing of injectors under acceleration??
  23. M

    biggest 7.3 lemon ever

    can you get to the ipr without removing a bunch of stuff? The sensor is on top(sort of) on drivers side cylinder head right?
  24. M

    08 rear end fit a 99 thru 04?

    Anyone one know if the 08/09 rear ends fit a 99 thru 04? I know the rims are different. But if you use those will the rear fit on the leafs? thx
  25. M

    leaf springs? when to replace?

    My trucks a 99 with mileage. I am not sure how many, i think a dmv error, so i must say a tmu. I can guess 150k. I recently replaced the front leaf bushing with poly. But wondering? how would i know if the leafs are good? it sits level? How about the rears? The original bushings seem good. I...

Members online

No members online now.
Total: 482 (members: 1, guests: 481)

Forum statistics

Threads
30,547
Messages
266,142
Members
14,676
Latest member
FlorWhitfe

Latest posts

Top