Search results

  1. M

    wheel bearing assy

    Ford F350 4WD 99 00 01 02 Front Wheel Hub Bearing : eBay Motors (item 230431093302 end time May-30-10 10:15:29 PDT) shoot him a message, I dont know the part number for you. Mine is 515025 for a fually. 2003 went fine thread
  2. M

    wheel bearing assy

    i got mine from a guy on ebay. 120 delivered. I will get you the link. Mine were for a dually but get the right part number. lifetime too
  3. M

    high pressure oil line seals?

    try Replacement O-rings for Ford Diesel Engines
  4. M

    40 mph vibration update

    I failed number 8 but replaced the injector. I pass the buzz and cct now. Passed it several times. No fuel in the oil either. Not really using and oil.
  5. M

    40 mph vibration update

    The way it is now, its tolerable. Theres about a 2 to 3 mile period where its funky while warming. I just unlock the tc with my switch. Before i fixed all the stuff i just did, it was every time the tc was locked, real bad shaking(violent). I swapped idm's with my wifes. She says that its...
  6. M

    40 mph vibration update

    well, if its an injector not completely firing due to temps, I would assume its weak. I tried the tc lock up different today, I started driving it with out warming it. I let it shift to third then locked it myself. It vibrates the whole truck til its fully hot. I have a 99 and an 01. the 99...
  7. M

    40 mph vibration update

    Ok, I have been chasing this low 1300 to 1400 rpm vibration in 4th gear for a while now. I originally found a bad #8 injector.(changed that) Found unplugged(sort of) uvch on pass side, it did not ohm out corectly.(fixed it) I replaced the tc, changed tranny fluid, tried a different idm. I...
  8. M

    installed 08 rearend into my 01, info??

    In my case I am wondering if this clunk(meaning something is loose somewhere) can also be my last vibration? I think a drive line clunk(looseness) would not shake the steering wheel?
  9. M

    installed 08 rearend into my 01, info??

    If the truck is in gear and the tires are on the ground the driveshaft is tight.(loaded) I had new u joints that seemed tight til i really looked and took the shaft out. The new ones went in(i thought tight) but still had play. Mine does not need to go a few feet to clunk. Go from reverse to...
  10. M

    installed 08 rearend into my 01, info??

    I have been fixing and fixing. The vibrations were bad. I replaced one injector that came up bad(passing buzz and cct tests now), replaced the tc, replaced u joints twice. The advance auto ones, were loose fitting into the shaft. The local drive shaft shoip balanced it twice and installed their...
  11. M

    installed 08 rearend into my 01, info??

    I bought an 08 rear off a guy. I installed it the other day. I thought I had issues with mine. Turns out maybe not. But anyway, I got the rear, with leaf springs and blocks. I cant use the leafs cause they 08's are longer. I used my original blocks not the 08 blocks(both sets are 2 inch...
  12. M

    Question valves

    Is there an AE injector in it? (#8) If not, you can change the injector to the long lead ae. It helps the sound big time. The hx line will help, as previously stated. The fuel, regulated return, helps a lot too.
  13. M

    Help Needed Mysterious clunking noise

    why would it clunk in 2wd? i canseeit in 4wd?But if that stuff is not moving why would it clunk? thx
  14. M

    Question Coolant question on the 7.3L??

    i usually do a little stronger then 50 50 but thats ok. Test the coolant for the freezing point too. check napa, then repost if they dont have it. Get an extra pack of 4 test strips. That way you can test it extra to play. YOu will understand after you get them and try it. dont mix coolant...
  15. M

    Question Coolant question on the 7.3L??

    yes, its dca-4 or dca-2 4 used molybdates with nitrate to get to the level. dca-2 just uses nitrates. Thats what napa sells(2) Either is fine. Just get test strips to test nitrate levels. The test strips need to match the additive. Get them at the same place. The regular coolant, however...
  16. M

    Fuel leak?

    Replacement O-rings for Ford Diesel Engines has the 3 orings you need for like 4 bucks. its uses a t15 torx i believe to remove it. Needs to be a socket form though. Not a srewdriver type. easy to fix. 15 minutes read bob guzzles how to. thats his site.
  17. M

    03 6.0 info needed asap

    thx, i still could use the info on my superchips 7.3 tuner reading codes on a 6.0??
  18. M

    03 6.0 info needed asap

    Found the issue, bad tire on the trailer, broke the belt and was coming apart.
  19. M

    03 6.0 info needed asap

    Friends truck is in trouble. I am going to look at it. All i need to know for now is will my 1705 sct superchips read codes on a 6.0? It willon my 7.3. thanks dorry for the 911. But she has horses being towed and the truck is barely running. thx
  20. M

    Help Needed Mysterious clunking noise

    i had the body mount under the pass side passenger foot clunk. I removed the female bottom rubber end and made a metal spacer then put the originalpiece back in with no rubber. Tightened it down this way. My excursion and my 99 clunked from the body mount. Just a thought. I have pics of what i...
  21. M

    vibration

    new gear oil seemed to help a lot. The old stuff(3 months) was like glue. I do not have any idea what happened to it. I think the ring and pinion is out of adjustment and whining and clunking. But the [I]shaking seems to have really mellowed out. i only drove it like 2 miles but seems to be...
  22. M

    vibration

    yes i feel it. I am putting in new gear oil today, then going to spin it with out the tires. I will use a couple lug nuts on the hub, then bring it to 38 mph. It could eliminate wheels.
  23. M

    vibration

    i recently got the truck. Pinion seal was leaking pretty good. I replaced it. I ddont know how it was. It had a terrible rive to it when i got it.Needed, ball joints steering box, one injector. It drove like crap and steered like it. I do know the fluid i took out did not look like this. I have...
  24. M

    vibration

    carrier bearing is new. i think its in the rear. I pulled the cover. I have never seen fluid come out like this. realy chocolate milk like. No water got in it. Maybe the vent was stuck? Its sticky too. i know what gear oil is like, its always kind of thick and smells funny. But this stuff is...
  25. M

    vibration

    i just looked at the gear oil. My first thought is it looked like chocolate milk.

Members online

Total: 349 (members: 3, guests: 346)

Forum statistics

Threads
30,547
Messages
266,142
Members
14,676
Latest member
FlorWhitfe

Latest posts

Top