Search results

  1. M

    if a 7.3 does not start??

    one of em, i was just curious on this thread? trying to read and learn how this 7.3 works. gained a lot of knowledge thanks to all you guys!!!
  2. M

    if a 7.3 does not start??

    where the icp on these? early 99? Would the uvch set a code?
  3. M

    if a 7.3 does not start??

    Just checkign for info, If a 7.3 dioes not start, we can unplug the icp? that will set itto default. If it starts then, replace the icp? If it still does not start, it could still be injector not getting enough psi, right? bad hpop? do hpop's fail? Or is it all mechanical there? Example...
  4. M

    6.0 mystery problem

    bump..........
  5. M

    Oil consumption Big Time!

    gunner U da man
  6. M

    Question Tire pressure

    I have a dually, i run about 70 front and 50 in rear, this is empty. with high rear pressure it drives real rough. Hook a trailer to it and 75 psi in the rear and drives fine.
  7. M

    Question ABS light

    i unplugged abs on my excursion, brakes worked better IMO.
  8. M

    What kind should I ask for and were do I go?

    have someone do it?That you know, at least look at it.Pads can range at advance auto from 20 to 60 bucks for front pads. Then it dependson how the rotors are. On my excursion i just replaced the pads and left the rotors alone. The rotors for front are about 70 at advance auto. 200 in parts and...
  9. M

    4 studs that hold fr hub on,

    thanks, there was a company that sold all the seals etc and special tools ? That way i could just order 4. But dealer would work
  10. M

    4 studs that hold fr hub on,

    where do you buy the 4 studs that hold the front hub on a 4wd? I had a companies email but lost it.
  11. M

    replacing injectors

    just the 1 or 2 revolutions before i install injectors, that eliminates hydrolock and its ok to start? I dont have a vacuume pump
  12. M

    replacing injectors

    how did you get the oil and fuel out of the cylinders? turn it over with no injectors in it? if so how did you stop fuel and oil flow?
  13. M

    replacing injectors

    when replacing all 8 injectors, do you have topurge the system before you run it? How about if only doing one injector? if so how?:)
  14. M

    determining which wheel bearing?

    are they just calle studs? i had a link but forgot the site that sells all that small stuff? \thx
  15. M

    determining which wheel bearing?

    How would you go about determining which wheel bearing is making the growling noise when going down the road?:dunno:dunno also the 4 studs that hold it to the hub? Iassume my old ones wilkl not be easily removed? What do you call these? i am trying to locate 4 of them too.
  16. M

    no inspection cover on tranny

    I have the auto in a 99, (forgot the tranny number) I need an inspection cover? Mines missing. I assume its dangerous to not have it and see the flywheel and converter spinning? thx any one have one lieing around?
  17. M

    7.3 duel inlet mod

    thanks big joe, maybe i am missing it in your responses, what i am trying to ask is not about the inside the tank. The line where it hooks to the unit outside on top of the tank. is that a qd line? does that leak air?(not referring to the pick up where you use a 3/8 coupler and a piece of...
  18. M

    7.3 duel inlet mod

    so, do I have to do the one at the tank too? is it as important as the one at the pump? I saw the pick up deal. Isnt a disconnect on the outside of sending unit hooking to the gas line? hows that attach up there from factory?
  19. M

    7.3 duel inlet mod

    basically, is there one of these at the tank too? quote from a previous thread " the "LOOSE, faulty, flimsy" fuel hose at the pump inlet to eliminate air being sucked into the fuel supply system"
  20. M

    7.3 duel inlet mod

    thanks, my question now is, am I just foing the end at the (inlet side)pump for now? Do i have to do the one at the tank too?along with the pick up part of the mod? I read the long thread on the whole deal. sounds like a good idea. I was not planning on dropping the tank yet. Its quick...
  21. M

    7.3 duel inlet mod

    I read the articles now, cool thanks. Interested in though, i thought at first I was only dealing with the one prior to entry to the pump. Isnt this one the most likely culprit? I see why replace all of it. But out of tank and out of pump is backwards to the inside of pump. All can leak air but...
  22. M

    7.3 duel inlet mod

    So a short piece of hose? I dont have to go from the tank? I will look at it tonite when the wife gets home with it. I have the tools to remove the quick disconnect stuff. I assume the fuelline is metal coming from the tank along the frame?i have a tubing cutter and stuff. What does the end...
  23. M

    7.3 duel inlet mod

    7.3 fuel inlet mod How are you guys doing the fuel inlet mod? Just cutting the line? using rubber hose and clamps? what about the pump side? thx
  24. M

    00 front clunking

    i had an f250 superduty clunk under my feet. It started drivers side then passenger. It was the body mounts. I used a piece of square stock at the frames bottom. i cut the rubber off the bottom female mount end. Threaded the bolt into it again. All noises gone. basically i solid mounted both...
  25. M

    fpr mod just did it need an opinion

    it could, i guess. I dont know where it would go? thru injector? It seems to run smoother. But wont know til a few days of driving. will keep the post updated. If 70 is a good number, I am not far off. What did you mean orifice blocked?? what blocked? It foes not stay at 75 after shut off...

Members online

No members online now.
Total: 824 (members: 0, guests: 824)

Forum statistics

Threads
30,547
Messages
266,142
Members
14,676
Latest member
FlorWhitfe

Latest posts

Top