Search results

  1. dboyw

    Help Needed throttle position sensor?

    Was this just the sensor or the pedal assembly? How many wires on the one you used? Looking for all info I can get before I have to order. Thanks
  2. dboyw

    AC Info

    Question about air conditioning in the truck. It just does not feel as cool this year. I have the ac mod to shut off the heater. I added 134a with stop leak and it made it better, but still not icy. I need to run max cool to feel good. 1. Should the compressor turn on and off for three...
  3. dboyw

    Atf

    Amsoil Torque-Drive Mercon not Mercon V rated lowered my trans temp around 10*
  4. dboyw

    Need picture of CCV intake

    I am playing round with the CCV mod and want to reinstall the piece that goes into the intake. I have "dry" fitted it and I just want to make sure it is correct. What I need to know is if the opening in the tube faces the filter or the turbo. Thanks
  5. dboyw

    Help Needed 6.0 Tranny Cooler Install on a 7.3

    Yea. I was watching one of the car shows on Spike or Speed and saw these. They are available at NAPA but I do not remember their name. They have a flexable bar in them that lets them bend 90* and hold that bend and not kink the hose. I only used two of them.
  6. dboyw

    Help Needed 6.0 Tranny Cooler Install on a 7.3

    I have pictures at home from when I did mine. Will try to post later. I removed the srcews holding the condensor and with bungies, moved it as far as I could to get access. I thought the bottom screws were right there at the bottom of cooler. I think the old cooler is 3/8 line and the new...
  7. dboyw

    Sonnex valve

    puredieselpower dfuser dieselinnovations blackclouddiesel
  8. dboyw

    Facebook? Myspace?

    Facebook
  9. dboyw

    O-Ring guide ?

    No guide, but these are are a few that I have saved. I'm sure you already have them, but I like to think that I help somewhere. Fuel drain valve 2 #202 1/4 ID x1/2 OD x 1/8 W Pedestal 2 #205 7/16 ID x 11/16 OD x 1/8 W 2 #211 13/16 ID x 1 1/16 OD x 1/8 W
  10. dboyw

    Greetings from Southeastern PA

    Greeting fellow Pennsylvanian. When you can, fill out your sig and tell us about your self. Welcome to SDD!!
  11. dboyw

    Sonnax Kit Instructions

    Here Here These are the two that I know of. Hopefully one is not the one you have.
  12. dboyw

    fuel pressure gauge setup

    I have this on my truck. Have it shimmed and works well.
  13. dboyw

    Question What did you do to your truck today?

    I installed my WARN hubs. I want to thank tail_gunner for his pictures. I read the directions, but the pictures made the install much better. Next, front and rear JimmiJammers.
  14. dboyw

    Big sale warn premium hubs!!!

    Yea, the company that had them for 109 must have only had a few. With in 24hours it was gone. I received mine today and it was a beautiful day to work on the truck. Installed in under an hour, with the kids help.:D
  15. dboyw

    Big sale warn premium hubs!!!

    I was looking for no good reason and found the Warn 38826 Premium Manual Hub Kit at amazon.com for 109.99 plus 11.29 shipping. Total out the door 121.28. Here is the link. Hope someone else can use this.
  16. dboyw

    Joke of the day

    I think you have finally discovered haow to stopp the teenage years. onety three to onety nine
  17. dboyw

    Question transmission tempeture gage install

    Here is an article that shoud help. I have the picture at home but I'm not at home. Straight picture of port
  18. dboyw

    Rear End Leak, not mine, the trucks

    Since the weather turned cold, I have rear diff fluid on the driveway. It looks as if it is from the vent pipe. It did it a little last year, nothing over the summer, and now it is back worse. Any ideas? I am running Amsoil Severe Gear 75W-140 with a Mag-Hytec cover. I have not been...
  19. dboyw

    Hello from Pa

    Hello from another PA member from Lancaster. What color is your truck? I'll be on the look out for it.
  20. dboyw

    Question Tricks to change the Water pump?

    And if you haven't finished yet, spend the few dollars for the upper hose for a dual alt truck. Goes around the belt, not through it. I "rented" the special fan wrenches from Advanced Auto.
  21. dboyw

    Gauge warnings

    Stock turbo on a superduty can go to about 25lbs. When I am in it, I back off at 22lbs. Aftermarket, don't know.
  22. dboyw

    stock exaust size on a 2001 ford superduty

    If I remember mine correctly, it will have a flange to fit the turbo, but it is four inch completely.
Top