Search results

  1. rynarnell

    4.30 gears/mileage

    ya its around 1100-1200rpm at 65 mph. I have been having to drive an hour to work on the freeway so i want to get the best fuel milege i can get. what do you guys recommend 4.11 or 4.30?
  2. rynarnell

    4.30 gears/mileage

    im not sure, i havent recalibrated the speedo yet. i know i need to. i definitley would like it to be better though
  3. rynarnell

    4.30 gears/mileage

    Hey i have been doing a lot of freeway driving lately with 38" tires and the stock 3.73 gears. It drives fine but i was going to get 4.30 put in. Will my fuel milege increase or decrease?? Thanks ryan
  4. rynarnell

    Can I run BioDiesel ?

    hey, where are you guys getting your bio diesel from? Most of you make your own or you getting it from stations? I sure wish we could get it in alaska. Thanks ryan
  5. rynarnell

    6 inch fabtech

    you shouldnt have a problem, just a little 45' agle cut on the lower bumber valance. You shouldnt rub either during the turn cause of the coil springs.
  6. rynarnell

    Please help! 2006 6.0L down in Alaska

    Sorry to hear about your truck man, im from anchorage and im with you about the techs at cal worthinton. not worth a damn.
  7. rynarnell

    Bio Diesel in Alaska

    thanks for looking
  8. rynarnell

    Bio Diesel in Alaska

    Hey does anyone know if or where they sell bio diesel in alaska, I am looking to run b20 in my 03 6.0. thanks guys
  9. rynarnell

    Roll Call Alaska!

    im stationed at Elmendorf AFB, just baught a house in wasilla so im not leaving alaska!!!! Currently im deployed to Iraq but i check this website as much as i can. Keeps the blood flowing. take care.
  10. rynarnell

    X is bogging down?!?

    Technicle service bulletins. They should always been checked and updated.
  11. rynarnell

    03-04 6.0 ???

    I have an 03 with 8" lift on 38's. Bought it with 41K now has 55K. No problems, great truck.
  12. rynarnell

    long start this morning

    This morning i went out to start my truck, i stopped cranking after 5 sec. then i let the glow plugs cycle again, and it started right up the second time. Its been getting into the 30's at night and last night i just filled her up and put in some diesel kleen. I also changed both fuel filters...
  13. rynarnell

    Transmission question

    i have an 03 6.0 in alaska. In the winters i just let the tranny warm up before i drive and it runs fine. Maybe just change fluid and filter will smooth things out for you.
  14. rynarnell

    Gauges or monitor w/ SCT

    I plan on getting a SCT II, but i really would like a good monitor to go with it. But if gauges are better I will get a triple pillar. Any Thoughts?
  15. rynarnell

    outlook w/ SCT

    So the triple dog set up with the outlook isnt a good programmer?
  16. rynarnell

    outlook w/ SCT

    thanks maybe ill just stick to some issopro gauges instead.
  17. rynarnell

    outlook w/ SCT

    I am planning on buying a custom SCT tuner with the outlook moniter. Is this a good idea? I was going to go with gauges but i just like the simple look of the monitor if i can get away with it. Plus i hear really good things about the SCT II. I have a O3 6.0 with 8" lift on 38", plan on putting...
  18. rynarnell

    glow plugs and the winter

    im from alaska where it gets pretty cold. I plug mine in, but i will start either way. I had mine crank a little slow once. But a battery heater fixed that. Plug yours in if you are able, to help engine life. I also run a anti gell so the filters dont clog.
  19. rynarnell

    rotellaT Vs Mobile1 Desiel Oil

    Which is better, Rotella or Mobile1 ? ive been useing rotella latelly but im hearing good things about mobile1, Also does the oilfilter really matter? do i have to go with ford motorcraft, or can i just go with Fram,Napa,or carquest? Thanks Ryan
  20. rynarnell

    intercooler

    anyone know of a good place to sell new 6.0 intercooler other than ebay? I have one lying around. I heard you can swap out the 7.3 intercooler with the 6.0 for more power, but i dont know of any modifications that need to be done. ??? thanks guys
  21. rynarnell

    Recommendations for 8" lift on 99 PSD

    i have a fabtech 8" lift and works well, comes with the carrier bearing shim kit, dual front shocks and i didnt have to replace the brake lines, i just moved the little bracket down about an inch. Keep in mind though if you do more than 6" lift you will have to legthen your front drive shaft...
View older results

Members online

No members online now.
Total: 244 (members: 0, guests: 244)

Forum statistics

Threads
30,547
Messages
266,142
Members
14,676
Latest member
FlorWhitfe

Latest posts

Top