Search results

  1. BIG DUTY

    photos 05 Conversion Complete

    Thats where i got my kit. It was very good with oem parts and at a good price.
  2. BIG DUTY

    Steering Stabilizer

    I replaced my worn factory stabalizer on my 2000 F-250 with a rancho 5000 when the truck was still stock height. I was very happy with the results. Seemed alot smoother to control. Now that I have 35" tires, im thinking about installing a dual stabalizer.
  3. BIG DUTY

    photos 05 Conversion Complete

    looks great! I did the conversion to mine as well. From the pictures, it looks like you had to trim the bumper to make the larger grill fit. I think your right, it looks better color matched, I should do that to mine.
  4. BIG DUTY

    Steering wheel slop

    The box is located at the end of the steering shaft, the tie rods connect to it.
  5. BIG DUTY

    2000 F350..20"or larger wheels?

    Are you planning to go with larger tires as well? Im almost positive you can go 20in wheels and 33in tires without lifting it.
  6. BIG DUTY

    Bob's Boost Tube Boots are the Bomb!

    Thanks Bama. Ive been looking at getting a set.
  7. BIG DUTY

    Bob's Boost Tube Boots are the Bomb!

    Bama, do you have any pictures of them installed on your truck? What color did you go with?
  8. BIG DUTY

    Biggest tires i can go

    I run 315 75 16 on stock wheels without any major problems. My biggest complaint is the tires rubbing the front leaf spring at full turn. This isnt a major problem you just lose a small amount of turning. I have a 2.5" front leveling kit from Summit Racing and a rear add a leaf. My truck is a...
  9. BIG DUTY

    Redneck Fun..............

    Your one crazy SOB. Snakes scare me to death, but i respect your skills.
  10. BIG DUTY

    Greetings form San Diego

    When you get a chance, fill out your signiture with more information about your truck. Year, Milage, mods etc
  11. BIG DUTY

    which lineis it?

    I used the port on the left side of the trans when I hooked mine up. I believe it is a NPT 1/8" port. My kit had the exact fitting I needed. Not only was it easier than using the return line, it is much more accurate. When I pull up a steep grade, I can see the trans temp rising and that is...
  12. BIG DUTY

    Update The new me....

    I liked the chrome look you had, Why make the switch? I think black wheels would help the new look
  13. BIG DUTY

    How to track source of inop analog turbo gauge

    Check out dieselsite.com, they have a gauge install kit that has all the fittings and line you need to install the boost gauge. They also use a better line that wont kink as easy as the white plastic line. The kit is a reasonable $12.
  14. BIG DUTY

    What are you paying for fuel now?

    1.99- 1.89 in central Michigan
  15. BIG DUTY

    New lift and Sneakers!

    Very sweet. Chrome fender trim is not really my style but they look great on your truck. It must be the wheels! Shiney
  16. BIG DUTY

    how big can I go?

    I installed the summit racing leveling kit and it added about 2"-3" up front. This allowed me to clear 315/75/16 BFG All Terrains with ease. They are mounted on stock 16x8 wheels. No bumper mods were necessary however they rub a little on the leaf spring at full turn.
  17. BIG DUTY

    Joke of the day

    That ring bear joke is hilarious. The funny thing is, this happened in my cousin's wedding in December. I was there and no one knew why he was doing this. Later on his dad told us he thought he was the ring bear. He rushed up the aisle clawing with his hands and saying roar...roar. This is a...
  18. BIG DUTY

    Joke of the day

    Ponder on these imponderables for a minute: 1. If you take an Oriental person and spin him around several times, does he become disoriented? 2. If people from Poland are called Poles, why aren't people from Holland called Holes? 3. Do infants enjoy infancy as much as adults enjoy...
  19. BIG DUTY

    Upper and lower ball joints

    I installed the Moog ball joints at the end of december. I got the kit from the powerstroke shop and it was a great deal. As far as the grease fitting, The upper can be greased and here is how. You install the ball joint without the 90* fitting installed. You then remove the plug they provide in...
  20. BIG DUTY

    Help Needed $1000 to Improve Towing!

    Thanks for the respone guys. I think I may upgrade to a Tony Wildman chip and put on the ATS housing. These are things ive wanted to do for a while but budget would not allow. After installing these items ill test it out and see if it cures the problems. My EGT temps never go over 1000*, so ill...
  21. BIG DUTY

    Help Needed $1000 to Improve Towing!

    Thanks for the tips guys ill let you know what i decide.
  22. BIG DUTY

    Diff lock

    Im unsure of the exact cost of the unit or the instalalation. When I had a shop put the tru trac in the entire axle was overhauled. You may check summit racing or other vendors to find exact cost.
  23. BIG DUTY

    Diff lock

    I dont have any info on replacing the clutches, but I did replace my factory limited slip with a detroit tru-trac. It works very well and relies entirely on gears for the limited slip and does not use a clutch system. It is supposed to be much more durable and reliable to a factory unit.
  24. BIG DUTY

    Help Needed $1000 to Improve Towing!

    It surges around 15-20psi and 2000RPM. The truck does not seem to loose power it just sounds like the turbo is going to self distruct. As soon as the truck down shifts the surge goes away and the boost jumps to 25psi. Because of the power delivery and the turbo noise i am convinced it is turbo...
  25. BIG DUTY

    Help Needed $1000 to Improve Towing!

    In response to me diagnosing the problem incorrect, if my boost gauge is fluttering is that not turbo surge? Could the flutter be cause by the HPOP or the fuel delivery?

Members online

No members online now.
Total: 419 (members: 1, guests: 418)

Forum statistics

Threads
30,547
Messages
266,142
Members
14,676
Latest member
FlorWhitfe

Latest posts

Top