Search results

  1. F

    ABS Light on and Throttle disengaging

    I recently went on a trip with my 7.3, while on the trip I used my cruise control most of the time. I guess I've got a loose connection somewhere because whenever I hit a rough patch of road the cruise would disengage, the speedo would drop 5-10 mph real fast until I could manually catch it...
  2. F

    Duplicolor Roll-on Bedliner??

    Anybody ever used it? If so, what do you think? Thanks!
  3. F

    Had my codes scanned, now what?

    I posted a couple days ago about the problems I've been having with my PSD; rough, high idle, no power over 2k, constant SES. I just had my codes scanned and here's what turned up. P0602, P0605, P1211,& P1690. Which I believe is: Control Module Programming Error, Internal Control Module ROM...
  4. F

    EXTREMELY rough idle to the point of dying

    any other ideas?? Thanks!
  5. F

    EXTREMELY rough idle to the point of dying

    I've removed the 10K, and replaced the CPS just over a month ago. No code though. Thanks!
  6. F

    EXTREMELY rough idle to the point of dying

    Today my truck started idling EXTREMELY rough, and died twice because of it. Also has horrible throttle response off the line because of it. I took a video with my phone to show you guys. Any ideas? YouTube - rough idle 7.3 Thanks!
  7. F

    Plug-in 18K module

    Anybody ever used one of these, or know someone who uses them? eBay Motors: 94-03 Powerstroke 7.3L FORD F250 F350 Programmer CHIP (item 320138595295 end time Jul-26-07 18:52:53 PDT) Thanks
  8. F

    Engine dying(not cps) and lack of power..help!

    It's oil residue
  9. F

    Engine dying(not cps) and lack of power..help!

    I took the hose off and took a couple pics of the wheel. It looks chipped to me but there's no play in it. Thanks!
  10. F

    Engine dying(not cps) and lack of power..help!

    I dont think its the CPS because I recently changed it and the engine only died the one time, now it's just a power loss. The SES light only comes on under extended acceleration but then goes back off.
  11. F

    Engine dying(not cps) and lack of power..help!

    Noone's got an answer for me?
  12. F

    Engine dying(not cps) and lack of power..help!

    BTT
  13. F

    Engine dying(not cps) and lack of power..help!

    I changed the fuel filter as well as checked and rechecked my connections. Also I reconnected a new 10K and still have the same issues. Thanks guys!
  14. F

    Engine dying(not cps) and lack of power..help!

    I was making a 200 mile trip today and around about mile 150 I started to lose power, luckily I was able to safely get off the road but after a few seconds at idle the motor died. I let it sit for a minute then tried restarting and after an extended crank it finally did so I got back on the...
  15. F

    1K Clamp Mod

    I'm pretty sure there aren't any shorts, and the switch doesn't seem to have any effect. I think I'm just going to go back to the 10K mod until I can get a circuit board and some some plugs so I just disconnect the stock plug and plug it into the new one. Thanks again for all your help!!
  16. F

    1K Clamp Mod

    I soldered it to the end opposite the plug, it sets it off just sitting.
  17. F

    1K Clamp Mod

    The light cycles like it should but then comes on after the truck has been running for a few minutes then stays on. I'm not positive about the .BMP file but I soldered the diode end of the chain to a wire connected to a switch, the resistor end of the chain to the 5.6k resistor which is...
  18. F

    1K Clamp Mod

    Well I hooked everything up, what a PITA! And to top it all off the damn thing isn't workin right. The idle is REAL rough, the service engine light comes on, and whenever I get up to about 2k it damn near dies. Oh yeah and I made the mistake of shutting it off and trying to restart, that took...
  19. F

    1K Clamp Mod

    I bought all the parts at radioshack, only costs a few bucks
  20. F

    1K Clamp Mod

    That sounds great, i was just going from what the op said..."You may also add a Clamp/Stock switch instead. If so, attach a length of wire to the end diode and run it thru the firewall to an SPST switch in the cab. (I’ve seen “customer use” wires dead-ended under the dash and hood that could be...
  21. F

    1K Clamp Mod

    I know i'm asking too many questions and stupid ones at that so I apologize; but let me make sure i've got this all correct. I take the 1K resistor and solder that to the 3 diodes. (diodes have grey band on right side and resistor at the end of the chain on the left). I then cut a section out...
  22. F

    1K Clamp Mod

    I think i've got all my connections soldered but i'm real skeptical
  23. F

    1K Clamp Mod

    awesome, thanks!
  24. F

    1K Clamp Mod

    I dont suppose you took pictures of your install by chance...i'm more of a visual guy so i like to see the install instead of just reading it. Thanks!
  25. F

    1K Clamp Mod

    How would you rate this compared to the standard 10K mod? Both in performance as well as difficulty of installation? Thanks!

Members online

Total: 283 (members: 3, guests: 280)

Forum statistics

Threads
30,547
Messages
266,142
Members
14,676
Latest member
FlorWhitfe

Latest posts

Top