Search results

  1. E

    Power window switch

    Smoked the drivers side switch :( . Do they sell just the switch or am I going to have to by the hole bank of switches? Anyone sell them online? Thanks Ed
  2. E

    Help no crank!

    Well it did it again. This time at work. Appears to be the selonoid on the starter. Gave it a couple of whacks an woke it up. Are these thing servicable?
  3. E

    Help no crank!

    Ok I don't know what happened but I tried it today and it fired right up. I looked for the solenoid relay and could not find it on the passenger side fender well do these trucks even have one? Anyway I cleaned up the battery terminals for good measure and hope it doesn't happen again.
  4. E

    Help no crank!

    I'm in need of some suggestions where to start lookin for the problem. I went to go to work tonight and the thing wouldn't turn over. It was fine in the morning started no problem now nothing. Glow plugs cycle turn key nothing not a click. Lights are bright and batteries are fairley new less...
  5. E

    Front Wheel Bearings

    I just did one. I got the hub on ebay same one Advance sells same warrenty for $190. delivered. Granted it took 3 days but I wasn't in a hurry.
  6. E

    Have you been to this site before?

    I like the fact that you can sh*t, shower and shave without getting up.
  7. E

    Clunking ?

    Ok I think I found the problem. It appears the passenger side bearing is shot. I jacked up the front and was checking for any play. The drivers side was tight as it was the previous time I checked it but the passenger side I got aout a 1/4 inch of play side to side and up and down. I also think...
  8. E

    Clunking ?

    I checked those and they also seem to be ok.
  9. E

    Clunking ?

    Well I got under the truck and started to see if I could find anything that would cause the clunking. The track bar seems to be ok along with the drag link and U joints. I'm not sure if the sway bar or stabalizer links (the small links that connect to the ends of the sway bar to the frame) are...
  10. E

    Clunking ?

    Hey all, I've got a clunking problem and could use some advice. When I turn the wheel to the left I here clunking and can feel it through the floor. It doesn't seem to do it when turning to the right. I can here it a little if I jerk the wheel quick to the left also. Anyone got some ideas as...
  11. E

    Bleeding ABS

    Figured I'd try posting this here. I am in process of changing a couple of brake lines (one in front and one in the rear) on my 92 f250 with rear abs. Is their a certain way to bleed them because of the abs? I noticed a junction box on the frame and it looks like it has a bleed sscrew on it. Any...
  12. E

    Front end help

    Hubs are fine its the inner dust seal I believe thats toast.
  13. E

    Front end help

    Hi all, I'm kinda new at this 4x4 thing so bear with me. I'm in the process of doing the front brakes and greasing the hub bearings. Well brakes are going fine. But after removing the hub assembly, the part with the needle bearings in it that I'm going to regrease. I noticed the seal that goes...

Members online

No members online now.
Total: 189 (members: 1, guests: 188)

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350

Latest posts

Top