Search results

  1. big_rooster

    broke down in missippi

    HPOP is being replaced right now they said it should be done by noon tomorrow.
  2. big_rooster

    Lockers

    just curious as to what you plan on getting into that you're worried about needing a locker. no locker here
  3. big_rooster

    Lockers

    are you looking for front or rear? If yer looking for a lunch box locker for the front end they powertrax makes a real good unit. Simple to install and only 300 bucks. However if you do the that locker on the front then i'd definitely get rid of the auto hubs if you have them and switch over to...
  4. big_rooster

    Question Dyna trac free spin kit.

    that is definitely on the to do list
  5. big_rooster

    Question Dyna trac free spin kit.

    down here they are like 2300 for the 99-04 and 2k for 05-09 higher than giraffe pooty
  6. big_rooster

    Question aftermarket stock bumper.. value?

    where is roundball? i have one in georgetown texas minus the fog lights that i pulled off.
  7. big_rooster

    broke down in missippi

    yes but what is the purge flow sensor
  8. big_rooster

    looking at lifts- Please post pics and info!

    pro comp 6.5" 37x13.5 r16 the deal with the big wheels is there are very few tires you can now get in a 37 on a 16 inch rim.
  9. big_rooster

    Front Hub Wont Turn

    $205 for warn premiums gets rid of the auto feature but now i know mine are disengaged.
  10. big_rooster

    broke down in missippi

    Driving last night 80mph touched the brake to let off the cruise control and truck shut off. Pulled to the side of the road and truck would not restart. There was no check engine light when the problem happened. Pulled a code of P0465 cant find any info on it not even in the bible. Sitting at...
  11. big_rooster

    changing gears for bigger tires on a diesel?

    Can still spin my 37's with stock 3.73's and at 75 mph im cruising at 1740 rpm whoo hoo
  12. big_rooster

    more turbo whistle and a straight pipe

    Yeah i'm just gettin tired of people asking me what aftermarket turbo i'm running with my 03. I also had a guy tell me my turbo was going out cause the whine was so loud lmao what a fag.
  13. big_rooster

    FYI In an attempt to protect and keep

    yeah i've been on this script for a year now love the stuff even use it on the windshield wiper cowl.
  14. big_rooster

    Sway bar bushings

    What have yall used to replace the bushings on the sway bar end links. Lookin for polyurethane or something comparable to it that will last longer.
  15. big_rooster

    Shifting without the clutch???

    Yeah we replaced the clutch on my buddies truck and 5 months later the clutch fork broke in half. So from now on when ever i do one i replace the fork also while i have everything out. Far as clutching goes the clutch is only for stopping and taking off IMO. Course i float gas motors too and...
  16. big_rooster

    Question Coil spring suspension swap

    If you wanna stay stock height you'd have to get the radius arms springs and all the steering components. The easiest would be to pick up the axle also that way everything is already welded to the axle for the mounting of the components. Course for 3200 you can go with a 6 inch skyjacker z link...
  17. big_rooster

    8 inch lift

    well you'll have to drop the carrier bearing to prevent vibrations. The kit should come with a front drive shaft spacer too.
  18. big_rooster

    Back Spacing

    5 inches of backspacing will be fine for yer 08 anything less than that and you'll run into rubbing problems on full lock due to the outer lip of the tire sticking out farther. If you plan on running 15.5's i'd go with 4 inches or 4.5 inches of backspacing to keep from rubbing yer radius arms.
  19. big_rooster

    203* thermostat

    Yeah but there's no 203 thermostat threads over in the 6.0 so i gotta play here. and 7.3's stay away from 103 psi :roflmao
  20. big_rooster

    Ebay shackles?

    An inch and a half doesn't really require a drop bracket for the track bar. Maybe when you do the add a leaf order you a track bar bracket for a 4 inch lift and you'll be good to go.
  21. big_rooster

    warning lights, a/c and stereo stay on

    This may seem crazy but if you open the under dash department on the very right is a bolt with several grounds on it. Every time i disconnect the ground the radio comes on check to make sure you have a good ground there.
  22. big_rooster

    Which Polish to use?

    Well the green will clean em up real good and leave a decent shine. You've got weld wheels it will clean them up great. The finishing one will give a mirror finish so good you'll be able to see yer fingerprints in the reflection. I bought the half gallon kit and have barely used any of it and...
  23. big_rooster

    Overhead Message center?

    Yeah you most likely got a loose resistor. Mine was workin again till i went mudding last night and bounced it around some more.
  24. big_rooster

    Back Spacing

    Yes we also need to know what year yer truck is cause you can fit 20 inch wheels on any vehicle. Also need to know if what look you are going for ergo an aggressive wide stance. Or tucked up under the wheel wells.
  25. big_rooster

    Wheel finish problems!

    All you gotta do is look up top of this page to our sponsor. Bad Dog Polish aint nothing else that i've used that works as good as it.

Members online

No members online now.
Total: 402 (members: 0, guests: 402)

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350

Latest posts

Top