Search results

  1. stroker21

    Lope idle when after starting

    I guess this is for the ones who might have a problem with this. I was having problems with my truck after starting it would lope idle like a really high horse power gas engine. I had replaced many things 1st-I replaced the IPR and nothing, still running the same. 2nd-replaced the...
  2. stroker21

    test

    new avitar
  3. stroker21

    Help Needed Momentary power loss - What is my Truck telling me?

    It was random. It got to when I was driving down the road it would start cutting out. I would bet it is your CPS. There only like $30 now.
  4. stroker21

    Help Needed Momentary power loss - What is my Truck telling me?

    My 97 OBS psd was doing the same thing. I replaced the cam sensor and haven't had any problems since.
  5. stroker21

    Gravity-feed of diesel fuel: Is it legal?

    My grand dad was doing some hauling and installed a tank on his pickup. He went to DOT to have it inspected to make sure everything was ok. He had a gravity feed system with a valve in place above an inline filter, if for nothing else to shut the fuel off to change the inline filter. They...
  6. stroker21

    what the heck is wrong with my front end?

    I have the same problem with mine. All I can say is that once I save up enough cash, I will be buying a good used D60 out of a 350. You can spend a boat load of cash trying to fix it and it never actually get fixed.
  7. stroker21

    Question 1.00 A/R turbine housings?

    Has anyone used one of these and if so what was the results? I have been toying with the idea but not sure whether to go with that or try and find a 1.15 ball bearing turbo. Let me knwo what ya'll think.
  8. stroker21

    Auxillary Tank Install

    I dont know about the svo system but I just welded a nipple into my filler tube and plumbed my aux tank in there. I actually welded two, one for a vent from the factory tank to the aux tank. My granddad had an aux tank on his dodge and when he transfers he has to open his fuel cap so that it...
  9. stroker21

    Brake Pads

    I have used the ones from autozone and they seem to work well. I have had to replace the rotors once but can't complain about that when it had 300K on the originals.
  10. stroker21

    GTS Motorsport IC Kit

    I was trying to find their website and can't find it. It takes me to some bull crap web-site. Does anyone know where to find this kit or another like it to make a 6.0 or 7.3 intercooler fit an OBS.
  11. stroker21

    DIY filter system

    Thanks everyone, I appreciate the input.
  12. stroker21

    DIY filter system

    This is a question to all the guys who have put on either a tymar or donaldson monster filter. How did you put the air sensor on it? I have been trying to figure this one out. My mechanic says it will make a difference if I leave it with out it. I thought I would check to see what the rest of...
  13. stroker21

    No power with Check Engine light on

    It sounds like the problem I was having and it ended up being a malfunctioning acelerator pedal assembly(the switch that in it). But you have to buy the entire thing. I would definitely check the codes because mine threw a code about it being the pedal assembly. good luck
  14. stroker21

    Exhaust- bang for buck

    I also was wondering which one is the easiest to install. I mean as far as brackets lining up and fitting together easily.
  15. stroker21

    Exhaust- bang for buck

    I have a 97 ext cab and looking for a 4" exhaust system with a flow thru muffler. I was wondering what you all are using and what you all think is the most bang for the buck. I would appreciate it. Thanks
  16. stroker21

    Spring under conversion?

    I dont know I will have to look into that as far as how much travel I would have left.
  17. stroker21

    Spring under conversion?

    I have been toying with an idea. I am thinking after I get a solid axle instead of the TTB, I might do a spring under. Now I have a lift kit that is springs in the front and blocks in the back. I think by doing the spring under in the front I can just take all the blocks in the rear out. The...
  18. stroker21

    Accelerator Pedal Assembly

    I installed the new one today and she seems to be running better than she has in a long time. I guess that stupid sensor has a lot to do with it. It has better throttle response than I have seen out of her in awhile.
  19. stroker21

    200,000.0

    I have 370K on original injectors. I have only replaced the starter once, the power steering pump once, rebuilt the trans because of hot chip being to much for it, lifter pump once, and batteries but that is pretty much it on mine. They are excellent engines. Just have to take care of them.
  20. stroker21

    Accelerator Pedal Assembly

    By the time I figured I could get those shipped here by this weekend it would make the prices outrageous. I ended up getting it from my mechanic for 304 including tax and picked it up today.
  21. stroker21

    Accelerator Pedal Assembly

    Thanks eveyone. I have found one finally that is cheaper once you look at shipping on those that you all mentioned. Thanks again.
  22. stroker21

    Accelerator Pedal Assembly

    Does anyone know where to get one of these? The stealer is wanting 390 and my mechanic can get it for 303 including tax. I have searched the internet and can't find anything. Thanks in advance for the help.
  23. stroker21

    engine noise engine drag

    This is the butter fly valve closing to try and warm up the engine. I was tlking to my mechanic the other day about this. He says it does it when it is cold to help get your engine up to temp.
  24. stroker21

    Got Blackstone Report in!!!

    I got my blackstone report in today. I am so proud. Here I am with 366,500 and they are saying to run the oil longer and that everything is holding up well. I have attached it in pdf format. I am very satisfied. I wont buy another vehicle without running one of these on it to find out if...
  25. stroker21

    Dana 60 conversion

    I have been wanting to do this also. I have a 4in lift so I dont think any griding will be required on mine. I have taken the middle supports out and replaced for the lift kit. They just unbolt. Good luck with it.

Members online

No members online now.
Total: 231 (members: 0, guests: 231)

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350

Latest posts

Top