Search results

  1. M

    Question HPOP Reservoir EMPTY! Is this something wrong?

    I'll give that a try as well. Thanks. I have a hard time thinking o-rings as I just put all new ones in when I did my injectors less than a year ago, but i guess you never know.
  2. M

    Question HPOP Reservoir EMPTY! Is this something wrong?

    Thanks for the help. I shall do some checking when I get a chance. Just to be sure, I have to remove the HPOP to check the o-ring correct or just the top half?
  3. M

    Question HPOP Reservoir EMPTY! Is this something wrong?

    Ok The fuel is good no black or oily residue. My filter is clean with no oily crap on the bottom of it in the lip or anything. fuel bowl is clean with no residue. My block is clean with the exeption of the leaky dip stick problem. The truck sits outside at a slight nose up position, and is...
  4. M

    Question HPOP Reservoir EMPTY! Is this something wrong?

    I hate to carry on an old thread, but I just found this same problem this morning. The HPOP was bone dry after serching as to why the truck would not start. I have been having problems with the truck taking a while to start in the mornings that I thought was GPR and or glow plugs. after several...
  5. M

    RPMs

    My '96 does the same with 265/75/16's. I run at 2900 with the tow haul button on and about 2200 in OD. I also have 4.10 gears.
  6. M

    Block Heater

    COOL! Thanks.
  7. M

    Block Heater

    Howdy all. Have any of you replaced the block heater? Mine quit on me in the middle of -20 weather here in wyoming. I checked the cable and found it is the heater itself. I have done it on gas engines where it only involved draining the antifreeze to reduce leaking on me, but with this one going...
  8. M

    Help Needed bringin the stroke out of hibernation,but gotta fix it first????

    Sorry to hear about your issues. It sounds like if you didn't have bad luck, you wouldn't have any at all. I hope things change around for you quickly.
  9. M

    Column Problems

    When my '96 250 did that, sort of, it was because the switch underneath the colum was loose. Sometimes it would shut off, other time I had to smack it a little. Once it was tightened back up and readjusted, it worke again. If in your case, it doesn't return at all, I would remove the lock...
  10. M

    obd2 connector?

    On my '96 it is below the left corner of the glove box under the dash pointing towards the seats.
  11. M

    #7 injector removal

    I just finished the nightmare of changing the O-Rings. Mine is a 96, but it has the screws for that piece as well. I have managed to drop my time to about 35 minutes on the removal of the passenger side valve cover. What a pain.
  12. M

    injector repair

    I finally got it running. After fully charging the batteries and cranking the heck out of it like you said, it finally got going. I sure appreciate your help. I can't believe the difference in how it runs with new O-Rings. I guess mine were worse than I thought. Thanks again everyone.
  13. M

    injector repair

    O.K I tried checking the Oil spitting out of the oil rail ( made a slight mess but oh well). Fuse # 9 is good. I cranked it for about 20 seconds on 1 minute off and did that about 8 times. I now have the batteries on charge again to make sure they stay full. I connected my superchips tuner up...
  14. M

    injector repair

    Howdy folks, I have an issue to run by you. I just got done replacing the O-Rings on my injectors. I did get some oil in one of the cylinders, but got most of it out with a hand sypher. Here is my problem. The engine cranks over, but no fire. I figure I just needed to get fluids flowing again...
  15. M

    Red FUEL FILTER Light

    Hey CRUMM just to add to your BS thread here, I had my feul gel on me last winter here in Wyoming because of the solder joint in the bowl. I also did see the show about your job hauling stuff up there. That is awesome how you all do that. Keep safe as the fun begins for another year.
  16. M

    a couple new pics of the stroke

    Looks pretty good to me. You did a pretty good job of cleaning it sounds like.
  17. M

    Lope idle when after starting

    I sure would appreciate it. I have time anyway. I am now in the process of draining my hpop so I can replace the oil in it and check my injector o-rings for damage.
  18. M

    Lope idle when after starting

    Mine is doing this too. Where is the sensor located on the transmission? I will have to check this out and see if I can find it.
  19. M

    Help Needed Ok I'm crying uncle on this one, need help.

    Man that is horrible. Have you made any more progress? Hopefully you guys can figure it out. I would have thought about compression problems as well. Keep us informed on what you find.
  20. M

    best mileage from a powerstroke

    You all have better luck than me. I drive 65mph 20 miles one way on the interstate to get to work and I am lucky to get 13 mpg. Even with the superchips on high performance, I get 12 or 13. I have done everything except buy a DP tuner or TS Chip. Some day I will be blessed with one of them.
  21. M

    Alignment issue? Need camber specs....

    I didn't notice it, that is why originally i didn't go any farther than the brakes and alignment. It was only after I tore the whole hub off and checked everything that I found it. The dust seal was torn and the back of the bearing race was starting to turn blueish. I got lucky i didn't freeze...
  22. M

    Alignment issue? Need camber specs....

    I had a similiar problem with my truck. After changing to manual lock hubs changing brakes shoes and a trip to the alignment shop with no help, I ended up finding the problem myself. My inner bearings were going out. Once I changed to new bearings inner and outer, I had the truck realigned and...
  23. M

    link for throttle position sensor????

    Try this. It is the link that was put on this site a while back. http://www.dormanproducts.com/documents4rb/2007ss/Acc_Pedal_Pos_Sensors2.pdf
  24. M

    fuel mileage

    I have the stock 3.55 (I think, they may be 3.73) with a floating diff. I guess thats what its called, it is not a limited slip. I hate the thing, because I get stuck in 6" of snow. That is definately an upgrade I need to do. All it takes is money and time, which I have neither of right now. I...
  25. M

    fuel mileage

    I drive like an old lady. I drive at about 70 Mph and hardly ever mash the go pedal. The majority of my driving is Interstate about 20 miles to work. I have stopped pulling my hair hair out about it, because no matter what I do or how I drive, it doesn't change. I have changed filters, replaced...

Members online

Total: 88 (members: 1, guests: 87)

Forum statistics

Threads
30,537
Messages
266,118
Members
14,662
Latest member
Correy01

Latest posts

Top