Things to do with eng out and timing cover off

[geonc]

.....BESIDES big oil, squirters,turbo...... work truck!
She has 250k mi on her......

What should be done to the HPOP?
Isn't there some kinda who-do trick for that

I'm gonna re-build the turbo and seal off the EBPV plunger. Found some oil on the back of the block and evidence of the EBPV rod leaking.

Would love elec fuel system but funds are kinda tight
{I know....who's isn't}

Anyone make a timing cover seal kit....all inclusive seals,o rings etc.....?

And what's with the stinkin' dipstick to pan fuster cluck-mad
How does that go back together

 

[oi8228oi]

i would clean that baby off with some simple green and make it shine before it goes back in

 

[94f450sd]

only trick for the HPOP is replaceing it with a humped super duty pump.

part# for the cover gasket set is "YC3Z-6020-BA" it comes with 1 tube of RTV for the pan and the cover.the cover is sealed with a couple Oring gaskets and the rest is sealed with RTV,new HPOP gasket,water pump gasket and 2 different reservoir gaskets,2 rectangular gaskets

the dipstick to pan thing is no big deal.replace the oring on it while it is apart.push the big piece through the oil pan and line up the tab with the correct notch.screw the nut on and tighten it.

 

[94f450sd]

http://community.webshots.com/photo/438383629/2986346480067175480AlHaJV#

http://community.webshots.com/photo/438383629/2005654980067175480DZWRLs#