Overhead console

[F350DRW1]

So my overhead console just stopped working. I know I've seen some threads on here about this issue. Can someone give me some ideas? Fuse? Circuit breaker? It was kind of going from temp to mileage on its own, then just went blank. Not that it was that accurate to begin with....

 

[Scarlet_Nape]

Try here: WWW.FORGOTTON.NET

It's under F-350. He wrote up a "how-to" on the overhead console.

 

[F350DRW1]

Thank you! Thats perfect. Appreciate the help. I have a feeling 1 too many potholes have taken their toll.

 

[Scarlet_Nape]

Let me know how it goes. Mine is "flickering" so I know it's going out soon.

 

[F350DRW1]

Let me know how it goes. Mine is "flickering" so I know it's going out soon.

It wasn't bad at all, just had to buy a little solder iron @ the local Radio shack. Thanks for the link.

 

[Tbar]

After being without mine for over a year I finally got it fixed..........YEA!!!


Tbar

 

[F350DRW1]

Fixed mine again over w/end..those resistors are very resistant to solder.

 

[JLDickmon]

Fixed mine again over w/end..those resistors are very resistant to solder.

Soldering Commandment #314: The Lord Sayeth, Thou Shalt Always Keep Tip Tinned,

Soldering Commandment #314A (New Modern Translation - Older Translations Include It With 314): Throu Shalt Always Use Fresh Flux Compatible With Job Pieces

Soldering Commandment #315: Bow To The Solder Lord Daily, Lest Ye Die

 

[F350DRW1]

The solder lord? You o.k., JLDickmon? Me thinks thou may have slammed thy head.

 

[JLDickmon]

The solder lord? You o.k., JLDickmon? Me thinks thou may have slammed thy head.

you would be correct, sir!