Manual Transmission Adjustments
- Thread starter paver
- Start date
Patrick Feeley
Full Access Member
There is no adjustment as far as I know. My guess is that the synchro is (or is on the way) out. Cheers!
DaveBen
SDD Senior Member
I have found that over the years the bearings start to go and that is one of the symptoms. You need a rebuild.
Dave
Dave
goldhilljoe
Full Access Member
Mine has been doing that 
for 40k . I have found that if you engage 4th gear prior to Reverse it helps. ALSO make sure the plastic bushing on the clutch rod is not worn out --I know how frustrating it can be. I tow quite a bit and the ZF is still holding up OK. If you do a search
you should be able to find out more on the plastic thingie.
for 40k . I have found that if you engage 4th gear prior to Reverse it helps. ALSO make sure the plastic bushing on the clutch rod is not worn out --I know how frustrating it can be. I tow quite a bit and the ZF is still holding up OK. If you do a search you should be able to find out more on the plastic thingie.
strokin'_tatsch
death row inmate #7
mine used to do that a lot so i took it and got new shift forks and seals thrown in it and it's been working great ever since then. i would definitely say that you need shift forks. if you can afford it, then it wouldn't hurt to go ahead and rebuild the tranny.
