Little rubber thingy on the end of my injector plug

[JOAT]

My apologies for the Monty Python sounding title

When I changed my Inj o-rings, I noticed the rubber gromets on the injector end of the UVC wire connectors were hardened. One was damaged so I threw some o-rings on for now. The wires and plugs themselves seem fine.

Has anyone ran across a source for the rubber part, or is it only available with the UVC wire?

 

[Patrick Feeley]

And now for something completely different ...

I think they used the rubber seals on the early snap-on style UVC harnesses. The newer ones that have the "bail wire" catches don't use a seal. I know the old ones don't fit the newer harnesses without a bit of modification. Cheers!

 

[MUDWHISTLE]

And now for something completely different ...

I think they used the rubber seals on the early snap-on style UVC harnesses. The newer ones that have the "bail wire" catches don't use a seal. I know the old ones don't fit the newer harnesses without a bit of modification. Cheers!

Hey what is you baldwin air filter part number? I'm going to make my own and would like to know what filter to use. and what did you use for your aic?

 

[ltfox]

NAPA part # 6637 is the filter.

 

[hheynow]

or a Dura Lite ECB085011 by Donaldson

 

[95_stroker]

Hey what is you baldwin air filter part number?

(Baldwin) PA2818
(Fleetguard) AH1141
(K&N) RE-0860 (~12" long w/4" opening)

 

[MUDWHISTLE]

thankyou