fuel pressure guage works now...

[Tx_Atty]

Well I finally got the fuel line from the FPR to my isolator and, believe it or not, it works and I did it myself without screw ups (I hope).

I removed the schrader valve altogether and put in a new fitting to match the line.

Idle showed roughly 55 psi and about 60 at ~40 mph. A lot of needle flutter at idle but smoothed some running. Going to lake Buchanan tomorrow for the weekend so I'll see what it does at highway speed. I'll shim it next week to up it some.

Have a good weekend; I start mine at noon tomorrow. -popcorn

 

[roosterdiesel]

Well I finally got the fuel line from the FPR to my isolator and, believe it or not, it works and I did it myself without screw ups (I hope).

-popcorn

Glad it went well!

I'll look through my can of misc. fittings from all my hose swaps lately to see if I have a 90. I'm pretty sure I have a 45 to give the hose a little relief toward the firewall.

Now we'll see how well an isolator holds up to B100!