2008 Tailgate, Jimmi Jammer Install & Write-up

[BamaSixGun]

Here is the install & write-up that Steve at Truck Security ask me to do on his new Jimmi Jammer for the 2008 Super Duty Tailgate.

Jimmi Jammer Installation Article

 

[95_stroker]

Nice write up Stephen, looks like a fairly straight forward install, how long did it take and what was your tool list?

 

[BamaSixGun]

Nice write up Stephen, looks like a fairly straight forward install, how long did it take and what was your tool list?

From start to finish, it would only take about 30 min.

Tool list:

1. T30 torq bit (to remove access panel)

2. 7/16" socket (to remove the mounting nut)

3. Flat head screw driver OR 1/4" socket to tighten the hose clamp.

And yes, it was a very straight forward install, even Robert could do it.

 

[CHPMustang]

As expected another well done article from the BamaSixGun

Any wording that needs to be added/modified in the article lemme know

 

[BamaSixGun]

As expected another well done article from the BamaSixGun

Any wording that needs to be added/modified in the article lemme know

Thanks Bill, and thanks for adding it to the Wiki. Wasnt expecting that.