Search results

  1. bbressler

    Early '99 Exhaust ... Need Help ASAP

    I didn't know this! Thanks! I checked Texas law, it says: Muffler defined: Muffler is a device consisting of a series of chambers or baffle plates or other mechanical design for the purpose of receiving exhaust gas from an internal combustion engine and/or turbine wheels for the purpose of...
  2. bbressler

    Front Sway Bushings

    While greasing up some stuff under my truck, I noticed that I have a front sway bar bushing that's torn and destroyed. I hope that's the source of my annoying squeak. So -- I'm looking for a new bushing. JOAT's parts list shows this: (Energy Suspension) 4-5106 (front sway arm...
  3. bbressler

    Want to purchase a 2004 SD "Need Advise"

    -popcorn -popcorn
  4. bbressler

    Smell fuel in A/C at idle

    Second the fuel leak. My pump was leaking and the interior smelled like an oilfield. After I got that fixed, no more smell!
  5. bbressler

    Wiring harness FIX for the UVC pigtails that burn!!!

    These go into the UVC gaskets and control injectors and glow plugs. There are four of them, two on each side. Here's the rear one on the pass side..
  6. bbressler

    New BioDiesel location in Dallas

    If the 10 gallons of bio you started with filled you up, you now have 74.93% bio
  7. bbressler

    Interior door handle broken

    I think I've got a temporary fix for this. What I did was twist the handle portion, twisting the wire to make it tighter. I only turned it 4 or 5 times around, but it makes a HUGE difference. I'm thinking about going around to the other 3 doors and doing it to them too. It's like a new door...
  8. bbressler

    Brake Controller Connecter under dash

    Here's mine. The adaptor I got made up for the lack of slack...I think it has 18" or so with it...
  9. bbressler

    Interior door handle broken

    I need some help.. I feel like Luke Duke getting out of my truck :roflmao I need to tell some back story first. Last year, I had an incident where the inside drivers door handle broke off. Actually, there's a screw that went into the metal in the door, anyways, the metal in the door came...
  10. bbressler

    whats a 95 f350 7.3 dually worth?

    He must do a lot of camping! :eek: So, is he including the hitch with it too? If it's in good shape, I'd go for it. You may want to negotiate, see if you can get him to drop it a thousand bucks. Worst he can do is say no. Just go into the deal knowing that stuff IS going to start...
  11. bbressler

    whats a 95 f350 7.3 dually worth?

    Blue Book private party value is about $7,200. That's XL package, 2WD, no extras. All of that will just add to the value. Does the owner have service records, how well was it maintained? BTW -- Welcome to SDD!
  12. bbressler

    Alabama's 'Hogzilla' A real SuperDuty

    I think the picture with the hog hanging from the front-end loader looks fishy. From that angle, it doesn't appear to be 10'7" tall like they claim in one of the other photos.
  13. bbressler

    New Bio-Diesel System

    You might try: Us Petro Chemical Indust www.uspetrochemical.com 5075 Westheimer Rd # 675, Houston (713) 871-8838
  14. bbressler

    New Bio-Diesel System

    Bears, where are you from? I found lye at a car wash distributor, it's sodium hydroxide, or caustic soda. I bought a 40 pound bag for about $40.00, and it's lasted me two summers and still have most of it left. You can also find Roebic at Lowes, and Red Devil Lye is available in some smaller...
  15. bbressler

    New Bio-Diesel System

    Do you wash your finished biodiesel? It seems like you must be getting some methanol into your biodiesel to have more biodiesel than you started with as oil.
  16. bbressler

    Veggie oil road trip planned

    Ahh...pretty neat same price for all blends....
  17. bbressler

    Veggie oil road trip planned

    What I notice about that pump is the price is 2.55!!! Which selection did you make (5, 20, 100?)
  18. bbressler

    valve cover wiring harnesses

    Like this?
  19. bbressler

    Dirty Clutch

    Seems to work pretty good. As I accelerated on the way to work, each shift between 2 & 3 I did that. I've got 7 or 8 shots at that, now it seems to be grabbing MUCH better (maybe not 100% yet, I think I'll do it a few more times). Thanks for the tip.
  20. bbressler

    Dirty Clutch

    For quite a while, I have had a oil and guel leak. I finally got both of them taken care of, and I'm not leaking any more fluids. My problem is that while the fuel was leaking, it leaked down onto the flywheel/clutch and when I accelerate slightly more than normal, it begins to slip. I know...
  21. bbressler

    Big Oil Leak

    So far, so good. Got about 400 miles on it since repairs were done, no leaks yet. Tomorrow I go on a 500 mile trip, should be a good test. Thankfully, he warrants his work for 6mo or 6000 miles, so if it springs a leak before then, it'll be OK....
  22. bbressler

    Trailer Tire Questions

    Just checked my old ones...manufactured in January '01. 6 years. Just glad I noticed the bubble before taking a long trip! Thanks for the advice, guys. :thumbs:
  23. bbressler

    Trailer Tire Questions

    I'll check on my set at home to see if I can find the manufacture date for the bad ones. They are 15" Goodyear Marathon's. It wouldn't surprise me if they are indeed original, trailer is a 2001/2.
  24. bbressler

    Trailer Tire Questions

    While cleaning my 5er this weekend, I noticed that I've got a tire that's got a bubble on it. So -- I'm in the market for some new tires for this thing. It's empty weight is about 6800 lbs, maybe up to 8500 or so loaded. Dual axle. My questions: 1. How many of you run LT or Passenger...
  25. bbressler

    New Bio-Diesel System

    Looks good! I'm interested to see how the PVC holds up...will you keep us updated?

Members online

No members online now.
Total: 153 (members: 1, guests: 152)

Forum statistics

Threads
30,563
Messages
266,210
Members
14,687
Latest member
Pm_guru

Latest posts

Top