Search results

  1. early 99 stroker

    Wastegate accuator

    if you pull the end of the rod off where it hooks to the waste gate..you can drill it out and make it adjustable..i did this and have it set at 32 psi...when i hit the go peddle the boost climbs right to 32 and stays there till i let up...i would not push your stock turbo past 27 lb's...you will...
  2. early 99 stroker

    Couple questions...

    man took me some digging but i found the link that backs what im trying to say.. Q. If I disconnect the sensor, some say this will throw a code ,so they remove the turbo, cut the actuator rod off, and tap the hole in the pedestal and put a plug in it with the sensor still plugged. Is this...
  3. early 99 stroker

    Couple questions...

    i just unhook the plug like you did. this will give you a soft code stored on the PCM but does no harm....it will default the valve to stay open with the spring and rod..this will keep aolt of the oil going to the bearing in the turbo rather then trying to open something thats not there...if you...
  4. early 99 stroker

    question

    you can still use it..it wont hurt any thing...just dont un hook the red line...
  5. early 99 stroker

    question

    you may want to get the wicked wheel before you do it.....you will get surge sure as chit...it is not good for a turbo at all..it sounds like a pressure cooker and you will see the boost gauge bounce...what this is.. the turbo will stall..the wheel and shaft are spinning well over 10,000 RPM's...
  6. early 99 stroker

    Couple questions...

    this guy has good prices and he ships fast..his name is Bob and is a very nice guy to deal with..i just got some for my dog house last week.. Replacement O-rings for Diesel Engines
  7. early 99 stroker

    question

    as long as you dont hit the 30 LB mark all the time...after 27 or so LB of boost you have too much back PSI....this is hard on the turbo...with it un hooked you spool alot faster....that is whats nice about it...you must have the wicked wheel in there?? if not..she will surge alot..thats not...
  8. early 99 stroker

    water pump 7.3

    if you look on the fan shroud on the right side of the fan where "caution fan" is molded into it..you will see it also said "right hand thread on fan clutch.. by the way..not sure if i was to late for it to go today..but the resistor was droped off at the PO..sorry im a day late....
  9. early 99 stroker

    Question modded idm

    if you dont want to do the mod but want to have it..Beans has a great deal on a moded IDM... Beans Diesel Performance - 7.3 Power Stroke IDM Modification (Powered by CubeCart)
  10. early 99 stroker

    water pump 7.3

    i had the same problem..i used a air chisle to loosen the nut....sounded better then pulling the rad..
  11. early 99 stroker

    Help Needed interesting issue with a tony wildman chip..

    Quote: from Tony Wildmen posted on another site i belong to a few weeks ago.. I would like to first of all apologize to all the folks trying to get ahold of me. After being gone most of the month of February, I was considerably backlogged with orders and reburns. I was trying to get caught...
  12. early 99 stroker

    ambulance package ecm reflash

    the super chip is just a glorified 10k mod that lies to the PCM to dump more fuel..yes it adds power..but nothing like custom tunes do..custom tunes also change timing to use the fuel its dumping..I bet your truck blows coal black smoke when you put your foot to the floor doesn't it?? black...
  13. early 99 stroker

    Question Fuel Pumps

    a set of hybrids, a garrett BB turbo and a good HPOP..the hybrids need some custom tuning cause there single shots..you also need to up grade the valve springs and push rods and install some head studs..the first thing you need to do is find out if you have Powdered metel rods or forged...
  14. early 99 stroker

    ambulance package ecm reflash

    dont waste your time with the Dealer....that program will just mess thing up on you...send your IDM to Dp Tuner... for 75 bucks he will put what ever HP tune you want on it and firm up shifts as well as move the shift points for better use of the power....
  15. early 99 stroker

    Question Fuel Pumps

    i agree....the stock HPOP and stock injectors wont let you get much over 350 HP if your lucky.... your custom chip has taken over the PCM..so your six gun is about worthless..not a good idea to stack with custom tunes any ways..your tuner has asked about all it can from your truck..banks is old...
  16. early 99 stroker

    Question modded idm

    its about all the injectors can handle..i think swamps diesel make a super modod for high HP trucks..but it takes big injectors to use it..
  17. early 99 stroker

    serpentine belt tensioner pulley

    i got the tensioner with both pulley's at napa for like 50 bucks..
  18. early 99 stroker

    Question modded idm

    i bought 20 of each..i got a big break on them that way..i gave a bunch away..they only cost me like 2 or 3 cents a piece with the shipping..i dont have any more for the 120 V IDM 99.5-03 trucks...but i do have some for the early 99 and OBS trucks...if any one wants one..send me your address in...
  19. early 99 stroker

    Question modded idm

    the OBS trucks have a 100 V IDM the early 99 has a 110 v IDM and 20 HP gains can be had with the 140 resistor..99.5-03 trucks have 120 V IDM's.. little less HP gains.. but throttle response and low end power can be felt... here is a pic of the resistor that needs to changed..as you can see in...
  20. early 99 stroker

    New 7.3 Y Pipe

    Ford did the same thing in the 99.5 trucks and kept it till early 03 when they stopped making the 7.3..only its molded into one ..but its just as smooth.. the way the 7.3 turbo is set up it does not have time too heat the air in the spider..all this thing is good for on our truck is the...
  21. early 99 stroker

    Question Fuel Pumps

    what year truck do you have?? 1/2" fuel worked well on the obs trucks do to the mechanical fuel pump..with the amount of restriction in the head of these trucks..i dont think you will use more then 50 GPH. i know a couple guy's running 50 GPH fuel lab fuel pumps running 600 HP..
  22. early 99 stroker

    Slow cold starting: How to check GPR???

    here you go..post 2 in the pic is battery feed...always hot..post 4 should = post 2 when key is on and GP is active....
  23. early 99 stroker

    Question Elect fuel pump

    if you have not done any mods inside the fuel tank...your neighborhood gas station will not be your problem..there is a very fine screan and some filters in the tank that wouldnt let it get though..id look to the fuel pump..it may leave you side the road soon...
  24. early 99 stroker

    Help Needed Stupid Up Pipe Gaskets

    after doing my donuts 3 times I finally went to IH and got bellowed up pipes...it has a gasket with a bellow rather then a donuts..3 years now and still no sign of any leaks..I even painted them orange with ceramic paint just to make easy to see soot..just click on the pic and see the album..
  25. early 99 stroker

    Question Fuel Pumps

    you will love this pump..bolts right in...set the PSI to 65 and it will never drop... eBay Motors: WALBRO 255LPH External FUEL PUMP GSL392 GSL-392 Inline (item 390001616082 end time Mar-13-09 20:01:43 PDT)

Members online

Total: 111 (members: 2, guests: 109)

Forum statistics

Threads
30,563
Messages
266,210
Members
14,687
Latest member
Pm_guru

Latest posts

Top