Search results

  1. 0

    6.0 running rough, no throttle, no hot start

    And I should mention I did have injector circuit codes for numbers 1, 2, 6, and 7 I believe Sent from my LG-M322 using Tapatalk
  2. 0

    6.0 running rough, no throttle, no hot start

    So newish problem, it started and ran and then hit a higher temp and started running rough, I had no throttle so I got pissed and went out and started wiggling wire nothing changed until I got to the ficm harness, I wiggled it and it ran rougher and then I moved it back and it ran and then I had...
  3. 0

    6.0 running rough, no throttle, no hot start

    They aren't oem but they are pretty close, quality wise they are about the same as what was in there. As for sticking with it I don't see any other options can't afford a shop and can't learn if I don't try. And I have seen so many threads where people have problems like mine yet they never...
  4. 0

    6.0 running rough, no throttle, no hot start

    Those codes are kinda confusing me, and with the new style dummy plug I'm guessing it was a mess up on my part not an actual failure maybe an idiot install Sent from my LG-M322 using Tapatalk
  5. 0

    6.0 running rough, no throttle, no hot start

    Sorry for late reply been working on it today, I do not have a fuel gauge but I am sure I can get my hands on one. Update: I pulled both oil rails off to inspect seals and found the white (plastic?) ring on top of the upper dummy plug seal had broken, other than that no other issues. I had to...
  6. 0

    6.0 running rough, no throttle, no hot start

    So I added the pid for v ref and it stayed at 5v the whole time, I also have some screenshots from when it went south so to speak. Key on engine off Cranking Running And then when it reaches about 120 oil temp it changes and the load jumps up, but at 85% And then the ipr % is going down and...
  7. 0

    6.0 running rough, no throttle, no hot start

    Awesome, thank you bismic. Now with the fan speed sensor I don't have it plugged in because of mechanical fan clutch would that still be causing an issue or no because its not completing that circuit? Sent from my LG-M322 using Tapatalk
  8. 0

    6.0 running rough, no throttle, no hot start

    Okay well that will be tomorrows check and same with unplugging the MAF after the v-ref. Now for the v-ref should that be koeo and cranking and running? Sent from my LG-M322 using Tapatalk
  9. 0

    6.0 running rough, no throttle, no hot start

    But could those just be from having the key on engine off? Sent from my LG-M322 using Tapatalk
  10. 0

    6.0 running rough, no throttle, no hot start

    Okay, I actually downloaded the Forscan demo (free version) I like it I might have to pay for the full version, and no out of the ordinary codes. Just the ebp sensor code because I tried unplugging it and the fan codes are from running the mechanical fan clutch Sent from my LG-M322 using Tapatalk
  11. 0

    6.0 running rough, no throttle, no hot start

    Now would the MAF sensor cause a stall and other problems? I just see that engine load and vgt and they change at a specific time yet I have no code for a MAF sensor but I have seen a couple things point to that Sent from my LG-M322 using Tapatalk
  12. 0

    6.0 running rough, no throttle, no hot start

    That's fine thank you for the help, note what about engine load at idle it also jumps up at the same time? Sent from my LG-M322 using Tapatalk
  13. 0

    6.0 running rough, no throttle, no hot start

    bismic I have seen a lot of your posts and you are an awesome guy, thank you for your help and assistance. In absence of an air test I guess taking crap apart again is my option? I'm kind of in a tough situation and don't have access to a lot of stuff Sent from my LG-M322 using Tapatalk
  14. 0

    6.0 running rough, no throttle, no hot start

    I just took the turbo apart and cleaned all the vanes and before parking the truck and replacing that pushrod everything was fine, now the load goes way up as soon as I got about 120 degrees oil temp. But what controls the VGT %? And causes it to go so high at a certain temperature? Sent from...
  15. 0

    6.0 running rough, no throttle, no hot start

    And I am gonna sound like a broken record here, what do you think the possibility of a leaking top seal is? Sent from my LG-M322 using Tapatalk
  16. 0

    6.0 running rough, no throttle, no hot start

    Hate to be a noob and continually asking questions do you know of a way to set up the torque pro to monitor v-reference voltage? Sent from my LG-M322 using Tapatalk
  17. 0

    6.0 running rough, no throttle, no hot start

    Well the ICP is new and new pigtail, I don't have another ficm and with a ficm causing warm issues wouldn't it pop a code or throw some signs like low voltage or something else? Or does that just not throw any signs just happens? Sent from my LG-M322 using Tapatalk
  18. 0

    6.0 running rough, no throttle, no hot start

    So I got it to run, no idea how, it just decided to start. I got some pictures of it running and also trying to start it after it died, this thing is so frustrating. I have a feeling I will have to pull the oil rails off and check my work, maybe I nicked a top seal? It seems to reach about...
  19. 0

    6.0 running rough, no throttle, no hot start

    I have the Kiwi 2+ bt reader. I am always full of questions but I figure better I should try and learn all I can, what would cause the logic voltage to be down while the main is still reading 48v? Sent from my LG-M322 using Tapatalk
  20. 0

    6.0 running rough, no throttle, no hot start

    Yeah I had one picture where I had the icp unplugged and same result no start. Is the ipr at 53% showing I have a leak or is that fine with the amount of pressure the icp shows? Sent from my LG-M322 using Tapatalk
  21. 0

    6.0 running rough, no throttle, no hot start

    Here is some cranking, after replacing what I replaced I can't even get it to start Sent from my LG-M322 using Tapatalk
  22. 0

    6.0 running rough, no throttle, no hot start

    Thank you bismic for the clarification on the hpop, I think I actually found another post of you saying that same thing along those lines. Now what would be the odds of an hpop going bad while essentially sitting? I parked this thing and ended up changing out a pushrod that was bent causing a...
  23. 0

    6.0 running rough, no throttle, no hot start

    Almost hate buying these things used when you have no idea the history on it whether that work has been done, now if it has whats the likelihood of it breaking again? Sent from my LG-M322 using Tapatalk
  24. 0

    6.0 running rough, no throttle, no hot start

    Now what would cause a stc fitting to break? Sent from my LG-M322 using Tapatalk
  25. 0

    6.0 running rough, no throttle, no hot start

    Now how big of a leak? Would that even show up down the side of an injector or would the ipr % being ~29% show that? Sent from my LG-M322 using Tapatalk

Members online

No members online now.
Total: 614 (members: 0, guests: 614)

Forum statistics

Threads
30,555
Messages
266,178
Members
14,679
Latest member
Ricksofla

Latest posts

Top