Search results

  1. S

    Good Article On The Transition To ULSD..........

    The new fuel will be more expensive — both in unit price and operating cost. It will cost at least a nickel more than 500-ppm blends, provided there are no supply disruptions, and is expected to increase fuel consumption by up to 2%. Consumption will even be greater on 2007 trucks because the...
  2. S

    Too much black smoke at 2500 rpm?

    Easy Dave, I was just saying/trying to say I know what causes the black smoke. I wasnt being rude... The reason I brought up the Turbo was in case it wasnt spooling up fast enough??? Took the chip out and still have the Same issue..Hmm its odd
  3. S

    Too much black smoke at 2500 rpm?

    I know this... I am trying to figure out why I am over fueling and the turbo may not be giving me enough air flow. Its not the chip becuase its in the stock position
  4. S

    Too much black smoke at 2500 rpm?

    This is a solid statment, but for a year I have driven it like this and for the last 3 weeks Im getting smoke like I have it in teh 80hp chip setting, buts its at stock. I know this by checking each setting and taking the chip out. So I am now wondering ebpv? or injector wear? or...
  5. S

    Too much black smoke at 2500 rpm?

    Only I drive it and I check it everytime before I crank it.
  6. S

    Too much black smoke at 2500 rpm?

    1. Yes Exhaust is still the same at idle. I am starting to think the epbv is closed. 3.yes the turbo is spinning freely. no endplay its stright on when spining. 4. nope I even took the chip out and reset the cpu to be sure. 5. If I go the 80 econ mod its slightly more smoke but faster in the...
  7. S

    Too much black smoke at 2500 rpm?

    Now you know I dont run the Chip till I get the gauges, I used the chip twice since I had it at 80 econo mode for maybe 10 seconds each time.... it always stays in stock position. If I am at a dead stop, and I give it throtle to 2500 rpms quickly it smokes alot... Black smoke. It gets up and...
  8. S

    Too much black smoke at 2500 rpm?

    Guys my truck with the chip at stock if I give it some gas about 75% throttle and get to 2500 rpm I get WAY to much black smoke.... I changed the air filter on it and checked and made sure all the turbo cac pipes were tight any other ideas??? Maybe my turbo is going out? I cant hear it...
  9. S

    Engine Cleaning Article?

    I cant seem to find that old article we had up about cleaning the engine. Out sid e of the obvious Cover the altenator spray down with degreaser and spray clean when the engine is cool or cold.
  10. S

    Fuel Pump shim to 70

    Working and flying all over the DANG place!
  11. S

    Fuel Pump shim to 70

    Yeah thats the one CHP posted too, 429, after tax and shipping... 500 .. Hmm yet another thing to save up for HA!
  12. S

    Fuel Pump shim to 70

    Whats up chp!!! and Ouch!!!
  13. S

    Fuel Pump shim to 70

    reg fule supply really 500$?
  14. S

    Front driver side inner fenderwell

    If I open my hood and look at where my tymar sits I see the plastic covered foam material in the fenderwell of the truck.. Now I know if you get a AIS with the foam piece they tell you take that out for more air flow. My question is how much air flow are we looking at there?? With summer...
  15. S

    Right rear brake and turn signal went out...

    Got it done last night! Man I been working NON stop and travelign alot for the company.. Now back to the slow season and posting!
  16. S

    Right rear brake and turn signal went out...

    How do I remove the rear lights?
  17. S

    Tonights Project

    ackk my pic looks like a tatoo outof a cracker jack box!!
  18. S

    Tonights Project

    Ughh, I haev to have a minimum of 7 feet deep of water for mine
  19. S

    Importation of some texas critters

    Crawled under the RV to change the septic tank, Felt sand or dirt dropping on my legs, I was in shorts, didnt shine the light down there thought it was sand.... ALOT of SAND.. well The sand starting moving... after about two mins uptoward the fellas.. I crawled slowly out from under the...
  20. S

    Highly Pissed off....

    Yeah, ill help... my advice get a kid to help!!! the have narrow arms!!!
  21. S

    Highly Pissed off....

    The stock cooler is as wide as my condensor and 1/4 of the way tall... Very Odd....
  22. S

    Highly Pissed off....

    I know Budro will get a kick out of this... SO I finally go to install the new Tranny Cooler. I get the bumper off pull everythign apart, Find the Tranny cooler in my truck is allready between the condensor and the radiator.. Hmmm thats odd right? I look at it and um Damn its pretty BIG...
  23. S

    Is http://kensperformancesolutions.com/ a sponsor?

    ?? If so any one ordered gauges from him? 300 painted for isspro gauges a pillar
  24. S

    Gauges will be in soon! pre or post turbo!

    Thanks Guys! Wife should be ordering this week for me ( birthday and all ) Illg et back to yall when I have them in Hand and thanks!!
  25. S

    Virus Warning

    About 1 out of 3 refresh's or new entries you get the SQL DB information splashed across the screen.. I didnt pay alot of attention to it though, seems fixed now.

Members online

No members online now.
Total: 432 (members: 0, guests: 432)

Forum statistics

Threads
30,555
Messages
266,178
Members
14,679
Latest member
Ricksofla

Latest posts

Top