Search results

  1. S

    Battery Voltages

    So when I open the top filter bowl the fuel in the bowl should stay in the bowl and not drain down???? Mine is empy and when I turn the key on the fuel starts running into the bowl and will overflow the bowl with the top off but when you turn the key off, the bowl empties. Is that not what...
  2. S

    Battery Voltages

    It ran for three days with that nicked up little plastic thingamajiggybob. I just took the fuel regulator back apart and relooked at everything on it. Other than the nicked platic thing. Anyone got one of those black plastic things left over from there blue spring mod that hey didnt use...
  3. S

    Battery Voltages

    Guys and Girls I put two new MC batteries into the truck today and still not running. i pulled the cap off of the Fuel Filter housing on top and it is empy. Is it suppose to be when you remove the top? I turned the key on and the bowl fills up but there is alot of air in the fuel as it swirls...
  4. S

    FICM tuner

    Fords quicklane normally checks their batteries for free way down here.
  5. S

    Battery Voltages

    Well ive been chasing my cranking no start issue since Saturday. I had Ed repair the FICM the week before and all ran well from Wednesday until Saturday. It was washed and would not start and is still siiting in the driveway. I replaced the cam position sensor on Monday morning thinking that was...
  6. S

    Cranking but not firing

    The engine was turning over as it normally turns overs. They were load tested individually last Tuesday. They checked out to be ok. I think I will check the three plugs underneath the FICM again. As it turns out the scanner was bad as it would not read any of my vehicles. Got a new loan a tool...
  7. S

    Cranking but not firing

    I changed the Camshaft Position Sensor and it still will not start. I unplugged the Injection Pressure Sensor on the PS valve cover and it would not start. I borrowed an actron OBDII scanner and it will not link. I have checked the fuses and found none that were blown. It says there is a 15A...
  8. S

    Cranking but not firing

    Of course the truck is in the driveway instead of the shop. I think i might go out as wiggle a few wires to see what may happen. I have just been in the area of the CPS and I had the DS battery and trays out as well as the air box and the CAC tube. Could have been into the CPS and wiring then...
  9. S

    Cranking but not firing

    I found the location of the cam position sensor and how to R&R. Should i see rpms on my tach wwhen cranking the truck? If I don't see rpms register on the tach is that another sign of a bad cam position sensor?
  10. S

    Cranking but not firing

    If the cam sensor is intermitently bad that could explain the cranks and runs god then cranks and no run. If the cam sensor is bad would that make it run rough? Where is the sensor located? BTW i corrected the P0264 code to a P0284 code in my previous post. That would be inject 8. I...
  11. S

    Cranking but not firing

    My son moved the truck today from out of my garage to wash it so he pulled it into the driveway. It will not run now. It cranks over and sounds like when a gas burner wants to fire but just will not catch and run. Ive plugged it in for the last 4 hours and just tried again. Same thing. When...
  12. S

    Happy thanksgiving

    Its hard to believe that thanksgiving day is here already. I need to be thankful to God everyday not just today. Happy Thanksgiving my friends.
  13. S

    Question Park Assist switch seems to be broken

    It has to be the sensors on the back. I have seen sensors on ebay for $10 or so. You might try to google to see if there is a way to test the sensors to determine bad or good ones.
  14. S

    Question Park Assist switch seems to be broken

    replace the switch
  15. S

    Question Park Assist switch seems to be broken

    I assume you are referring to the Backup alarm off switch button? Does the backup warning come on when you get close to backing into something? If so will it go off when you push the button? If it does go off then the button works as it should.
  16. S

    Help Needed Not running to run when cold

    Battery test is scheduled for Thursday evening when I get back in from road trip.
  17. S

    I know I don't want to hear the answer, but give it to me anyway

    I believe I would replace the oil cooler while I was just replacing the EGR cooler. Pull the EGR valve and look at the valve and inside the Intake manifold to see if it looks like it has been steam cleaned. I dont think that sounds like HGs to me. RR I just replaced mine myself but I ad an...
  18. S

    Help Needed Not running to run when cold

    Nope. Didnt replace it as supposedly when it was relocated to the front of the engine where there were not as many problems with it especially the oil leakeage issue that would short it out. The FICM was sent out today to FICMrepair to get this definite problem corrected. Now that I think...
  19. S

    Help Needed Not running to run when cold

    Swamps is $425 ASI is $62 (includes shipping both ways) and FICMrepair is $195. I dont know how ASI can make any money at their price so Im a little dubious about them. Swamps is too expensive and I talked with Ed at FICMrepair. He seems to know what he is talking about. Im sending it to Ed.Thanks
  20. S

    Help Needed Not running to run when cold

    FICM is pulled out. Where do you people suggest it be sent to get repaired?
  21. S

    Help Needed Not running to run when cold

    I can go check the sensors that I have messed with which are as follows: Sensor on the flexible air duct Sensor on the intake manifold Sensor on the fan shroud Sensor on the butterfly valve charge pipe Sensor at the thermostat I replaced the MAP Sensor Glow plug harness DS connector...
  22. S

    Help Needed Not running to run when cold

    Not running when cold As some of you know, I just replaced the EGR Cooler and oil cooler as well as cleaned the turbo and replaced the glow plug harness on the driver's side. The engine will not run when it is cold. Thursday night when I got it all put back together, it would not start as...
  23. S

    photos EGR and Oil Cooler Replacement in Pictures

    You just don't know how sickening it was last night to try to crank it and not be able to get enough voltage to it to get it to fire and RUN. Waiting all night and half a day to check it again was a teriible wait. When I went outside at lunch, the upper radiator hose was good and warm so I knew...
  24. S

    photos EGR and Oil Cooler Replacement in Pictures

    Well after charging the batteries on a slow 2.0 amp charge all night and half the day (automatic charger), plugging the truck in for 14 hours to warm it up, it cranked on the first hard turn of the day. It had a little air in the fuel but worked itself out witin a few seconds. Ran fine with no...
  25. S

    photos EGR and Oil Cooler Replacement in Pictures

    Well I got it all back together today without having any nuts or bolts left over. Only problem now is that she will crank and fire but will not stay running. I had to switch the key on and off about 5 times to ensure the fuel had cleared as much air as possible. When I first turned the key on...

Members online

Total: 316 (members: 1, guests: 315)

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350

Latest posts

Top