Napa Duralite Filter Question

roosterdiesel · Mar 5, 2006

Are these...

View attachment 1071

indicators that this filter is to element's dirt capacity?

View attachment 1072

That filter has 20k miles on it, pleats weren't pulled flat like that last week. The filter before this one didn't pull all the pleats like that, maybe about 50%. It had around 12k on it.

DaveBen · Mar 5, 2006

I would think flattening of a section would be, but the little flattening on the top part of a pleat is not due to vacuume. That is the strongest part of the pleat and it looks like ruff handling.

Dave :dunno

95_stroker · Mar 5, 2006

I just looked at my filter, its got about 5 or 6 thousand miles on it (3 months) and it looks bright white still but I too have flattened pleats just like your pic Antonio, so I have to say no, its not a pluggage issue.

I dunno, I think I should put my filter minder back on.

f100cleveland · Mar 5, 2006

Bugs being drawn in at high velocity have been known to make dents like that. The solution is to keep your foot out of the go pedal.

roosterdiesel · Mar 5, 2006

New filters are flattened a little at the end of the pleats every so often. It's just that the dirty one is wider at the flat parts now. No rough handling either, out of the box and onto the coupler

Here's the first filter I used.

View attachment 1075

Left arrow shows what rows on the filter on my truck now looks like all the way around. The right arrow is about what they look like new. :dunno

95_stroker · Mar 5, 2006

I didnt inspect my filter (closely) before I put it on the truck back in November, but Ive got flat spots on it right now that resemble your left arrow example, as I said... only about 5,000 miles on it and its pleats are still bright white.

roosterdiesel · Mar 5, 2006

Are they all that wide? Mine are wider than they were say a month ago. I do know that smoke has been a little more difficult to control but I'm also running the Evo right now.

95_stroker · Mar 5, 2006

I was kinda surprised how many of them were flattend (fattend?) out like what you have pictured.

f100cleveland · Mar 18, 2006

I had my filter off today when I changed out my PCM and noticed mine had alot of flat spot on the top of the pleats too so out of curiosity I blew through the inside with an air hose and boy was it full of dirt. It still looked fairly clean on the outside. I think I had 12-15k on it. Time for the new one. Maybe it is an indication of having to draw in air harder.

lifted_up · Mar 18, 2006

Don't you guys use a pre-filter (sock) ? I use an 'Outerwear' #20-2087-03(WR275-11T). It keeps the dirt down to .005 microns out and is water repellant. You can find info out at www.outerwears.com and it fits the large filter(8.5"diam x 11.5"). Just a thought :sweet

Napa Duralite Filter Question

roosterdiesel

Earl needs B100

DaveBen

SDD Senior Member

95_stroker

Jefe

f100cleveland

When In Doubt,THROTTLE ON

roosterdiesel

Earl needs B100

95_stroker

Jefe

roosterdiesel

Earl needs B100

95_stroker

Jefe

f100cleveland

When In Doubt,THROTTLE ON

lifted_up

TractorMan

Members online

Forum statistics

Latest posts